Chrysler Bending Tester

A tester simultaneously tests four samples, including three bend specimens and a folded specimen. When the bending jig sample is clamped at both ends, and taut, holding one end is fixed and the other end of the horizontal movement,
the bending test. The folded ends of the sample close clamped between two opposing plates, a 12lb load is applied in the folding area.If possible, close the flat to exert the appropriate pressure. Bend specimens’ tension with a fixed weight. Tension must be controlled.
read more on http://www.qinsun-lab.com/Products/Application/Leather/136.html
Chrysler Bending Tester